Fluke 5522A - Page 418

5522A
Operators Manual
C-2
Serial connection cables are available from Fluke are shown in Table C-2. See Chapter 8,
“Accessories,” for ordering information.
Table C-2. Serial Port Connection Cables
Connection Cable Fluke Part Number
5522A SERIAL 1 FROM HOST PC COM port (DB-9) PM8914/001
5522A SERIAL 1 FROM HOST PC COM port (DB-25) RS40
5522A SERIAL 2 TO UUT UUT serial port (DB-9) 943738
5522A SERIAL 2 TO UUT UUT serial port (DB-25) n/a
15
69
TRANSMIT DATA (Tx)
RECEIVED DATA (Rx)
DTE READY (DTR)
REQUEST TO SEND (RTS)
CLEAR TO SEND (CTS)
GROUND
fe-02.eps
Figure C-2. Serial 1 From Host Port Connector Pinout
TRANSMIT DATA(Tx)
RECEIVED DATA (Rx)
RECEIVED LINE SIGNAL
DETECTOR (RLSD)
CLEAR TO SEND (CTS)
REQUEST TO SEND (RTS)
DCE READY (DSR)
51
96
GROUND
fe-03.eps
Figure C-3. SERIAL 2 TO UUT Port Connector Pinout (connection side)