Features
Softkey Menu Trees 3
3-15
I
STALL refers to the method of controlling data flow: software control (xon/off), hardware control
(rts/cts) or none.
STALL refers to the method of controlling data flow: software control (xon/off), hardware control
(rts/cts) or none.
K
to L
HOST selects the IEEE-488 (gpib) (factory default) parallel port or RS-232 (serial) port. You cannot
operate both IEEE-488 and RS-232 simultaneously.
H
to K to Ito O
gjh030.eps
Figure 3-4. SETUP Softkey Menu Displays (cont.)
To Next Page
Loading...
