810
Users Manual
4-16
Next, the options for the Driven component show on
the Tester screen. See Table
4-10.
Table 4-10. Driven Component Options
Option Selection Description
Yes
Is there a flexible coupling between
gearbox and next component:
No
Configure the setup with or without a coupling between the
gearbox and the coupling.
Pump
Fan
Compressor
Blower
Spindle
Belt drive
[1]
Next component that gearbox is
attached to:
Chain drive
[1]
Scroll and select the next component in the drivetrain from
the list. See “Driven Component” for the options.
[1] These selections are unavailable if there is a flexible coupling between the gearbox and the next component.
To Next Page
Loading...
