810
Users Manual
4-34
gbk60.bmp
Note
The vibration from a drivetrain may change
depending on the load and ambient temperature
of the motor. You must finish a measurement
within 30 minutes. If not, the “Measurement
Timeout” message appears and redirects you to
select the Sensor orientation and location.
Table 4-17 is a list of the Measurement screen functions.
Table 4-17. Measurement Functions
Softkey Function
Change Displays the Re-orient Sensor and
Relocate Sensor options:
• Re-orient Sensor: Sensor
Orientation screen appears. Change
the orientation.
• Relocate Sensor: Sensor
Placement screen appears. Change
the Sensor position.
Measure
Tips
Displays information and tips for taking
measurements.
Measure Take measurement from the selected
location.
Next
Location
Move to the screen where you can select
the next location to place the Sensor on
the drivetrain.
Exit Exit to the Startup screen.
To Next Page
Loading...
