Operation
How to Measure Vibration
4
4-35
12. Push Measure to measure from the selected
location. The Tester checks for the Sensor cable
connection. If the connection is good, the Tester
measures the machine under test. The following
screen appears when the measurement is
complete.
gbk61.bmp
Table 4-18 is a list of the softkey functions for the
Measurement screen.
Table 4-18. Measurement Complete Functions
Softkey Function
More…
Displays the options to Re-orient and
Relocate the Sensor and Re-measure.
Push the required softkey to perform
the specific task.
Measure Tips
Displays information and tips for how
to take measurements.
Diagnose
Diagnose the measurements from a
machine.
Next Location
Move to the next Sensor location on
the drivetrain.
Exit Exit to the Startup screen.
To Next Page
Loading...
