Operation
How to Diagnose
4
4-43
gbk67.bmp
Table 4-21 is a list of the details available for the
cited peaks.
Table 4-21. Cited Peak Details
Label Description
Loc
Location of fault. Bearing locations are
numbered 1 to n, from free end of motor
(1) to end of drivetrain (n).
Axis
Direction of vibration signal: Axial, Radial,
or Tangential.
Amplitude
Vibration signal amplitude cited from this
specific location.
Orders
Multiples of the running speed or
frequency and identifies at which running
frequency that the cited amplitude peak is
detected.
Range
Frequency range of data collection, Hi or
Lo.
3. Push the Graph softkey to view the vibration
spectrum related to the fault. The Tester marks
the cited peak in red for the specific spectra and
displays the amplitude information.
To Next Page
Loading...
