Fronius VR 5000 - Device Concept; Field of Application; General; Requirements

7
VR 5000 wirefeeder
The VR 5000 series of wirefeeders, in combination with any of the standard protective
gas shields, is suitable for all MIG/MAG welding tasks.
General
Device concept
The VR 5000 wirefeeders can be operated with the TransSteel 3500 / 5000 power
sources.
Wirefeeders in the VR 5000 series are
equipped with a cover for wirespools with a
maximum diameter of 300 mm (11.81 in.).
The standard 4-roll drive has good wire-
feeding properties. The wirefeeders in the
VR 5000 series are also suitable for long
hosepacks.
Due to their compact design, the VR 5000
wirefeeders can be used in many different
ways.
Requirements
Field of applicati-
on