56
Set-up menu - Level 2
Set-up menu
level 2 - manual
control panel
Opening the set-up menu
The control panel is now in the set-up menu - the last parameter that was selected is
displayed.
Select parameter „2nd“
4. Use the Mode and Process buttons to select the parameter
„2nd“
1. Press and hold the Mode button
2. Press the Process button
3. Release the Mode and Process buttons
Accessing the set-up menu: Level 2
5. Press and hold the Mode button
6. Press the Process button
7. Release the Mode and Process buttons
8. Use the Mode and Process buttons to select the desired para-
meter
9. Use the Dynamic buttons to change the value of the parameter
Changing a parameter
Exiting from the set-up menu - level 2
10. Press and hold the Mode button
11. Press the Process button
12. Release the Mode and Process buttons
To Next Page
Loading...
