Fronius VR 5000 - Before Commissioning Safety and Setup

27
In order to achieve optimum wire electrode feed, the feed rollers must be suitable for the
diameter and alloy of the wire being welded.
Important! Use only feed rollers that match the wire electrode.
An overview of the feed rollers available and their possible areas of use can be found in
the spare parts lists.
Inserting / replacing feed rollers
General
Inserting / repla-
cing feed rollers
1
2
1
4
5
3
3
3
2
6
3
31
2
4
5
7
3
7
5
6
8
3
1
2
2
4
4
2
3
3
4
1
2
2
CAUTION! Risk of injury if the feed roller holders fly upwards. When unlocking
the lever, keep fingers away from the area to the left and right of the lever.