Fronius VR 5000 - Set-Up Menu Level 2 - Synergic Control Panel

57
Exiting from the set-up menu
13. Press and hold the Mode button
14. Press the Process button
15. Release the Mode and Process buttons
Set-up menu
Level 2 - manual
control panel
(continued)
Set-up menu
Level 2 - Syner-
gic control panel
Opening the set-up menu
The control panel is now in the set-up menu - the last parameter that was selected is
displayed.
Select parameter „2nd“
4. Use the Mode and Process buttons or the left adjustment dial to
select the parameter „2nd“
1. Press and hold the Mode button
2. Press the Process button
3. Release the Mode and Process buttons
Accessing the Set-up menu: Level 2
5. Press and hold the Mode button
6. Press the Process button
7. Release the Mode and Process buttons
8. Select the required parameter using the Mode and Process
buttons or the left adjusting dial
9. Change the value of the parameter using the Dynamic button or
the right adjusting dial
Changing a parameter
Exiting from the set-up menu - level 2
10. Press and hold the Mode button
11. Press the Process button
12. Release the Mode and Process buttons