14
Synergic A
control panel
Synergic control panel
General The power source uses the Synergic control panel and certain general items of data
such as sheet thickness, filler metal, wire diameter and protective gas shield to calculate
the best welding parameters. As a result, stored knowledge is available at all times. All
the parameters can be adjusted manually as required. The Synergic control panel also
allows parameters to be defined totally manually.
Synergic control panel
The Synergic control panel is split.
Layout of the
control panel
Control panel sections A and B
Synergic A control panel
Synergic B control panel
(6) (5)
(1)
(9)
(4)
(7)
(2)
(3)
(8)
To Next Page
Loading...
