Fronius VR 5000 - Saving and Retrieving Operating Points; General; Retrieving Operating Points; Saving Operating Points

48
The „Save“ buttons allow up to 5 tried-and-tested operating points to be saved. The
settings do not need to be documented manually. The current settings on the control
panel are saved.
Important! Set-up parameters are not saved at this time.
Saving and retrieving operating points
General
1. Press and hold down one of the „Save“ buttons in order to save the current settings
on the control panel, e.g.:
Saving operating
points
Retrieving opera-
ting points
1. To retrieve saved settings press the corresponding „Save“ button briefly, e.g.:
Once the left indicator has reverted to its original content, e.g.:
The left indicator reads „Pro“.
2. Release the „Save“ button
The control panel will show the saved settings, e.g.: