16
Synergic B
control panel
Synergic B control panel
Synergic A
control panel
(continued)
No. Function
(6) „Mode“ button
for selecting the mode
2 T - 2-step mode
4 T - 4-step mode
S 4 T - Special 4-step mode
(7) „Save“ buttons
for saving up to 5 operating points
(8) Transition arc indicator
between the dip-transfer arc and the spray arc, a spatter-prone „transition arc“
occurs. To alert you to this critical area - and help you avoid it - the transition arc
indicator lights up.
(9) HOLD indicator
every time you finish a welding operation, the actual values for welding current and
welding voltage are stored, and the „Hold“ indicator lights up.
No. Function
(1) „Material“ button
for selecting the filler metal to be
used. Parameter SP is reserved for
filler metals.
When a material type is selected, the
LED behind the relevant filler metal
lights up.
No. Function
(2) „Wire diameter“ button
for selecting the wire diameter to be used. Parameter SP is reserved for additional
wire diameters.
When a wire diameter is selected, the LED behind the relevant wire diameter lights
up.
(3) „Protective gas shield“ button
for selecting the protective gas shield to be used. Parameter SP is reserved for
additional protective gas shields.
When a protective gas shield is selected, the LED behind the relevant protective
gas shield lights up.
(1) (2) (3)
To Next Page
Loading...
