Fronius VR 5000 - Wire-feed Unit Underside Components

24
Placing wirefeeder on power source
General
Placing wirefee-
der on power
source
The wirefeeders can be placed on the power source if a swivel pin holder is available,
e.g.:
- „PickUp“ swivel pin holder VR 5000, for use with the „PickUp 5000“ trolley
CAUTION! Risk of injury and damage from falling wirefeeder. Make sure that
the wirefeeder is located securely on the swivel pin and that the devices, upright
consoles and trolleys are stable.
1
1