8
Warning notices
affixed to the
device
The wirefeeder is fitted with safety symbols on the rating plate. The safety symbols must
NOT be removed or painted over. The symbols warn against operating the equipment
incorrectly, as this may result in serious injury and damage.
Do not use the functions described until
you have thoroughly read and under-
stood the following documents:
- these operating instructions
- all the operating instructions for the
system components, especially the
safety rules
Warning notices on the wirefeeder
Welding is dangerous. The following
basic requirements must be met:
- Welders must be sufficiently quali-
fied
- Suitable protective equipment
- Keep all persons not involved in the
welding process at a safe distance
To Next Page
Loading...
