3
③ Third block parameters .............................................................................................. 49
Specifying control system and action, and output direction at input burn-out............ 49
SV (Setting value) lower limiter.................................................................................. 50
SV (Setting value) upper limiter ................................................................................. 50
The time of ON-delay alarm or timer function............................................................ 51
Hysteresis alarm 1 and 2 ........................................................................................... 53
Options of alarm 1 and 2 ........................................................................................... 54
Upper and lower limits for control output 1 ................................................................ 56
Upper and lower limits for control output 2 ................................................................ 56
Output limit types ....................................................................................................... 57
Output value display .................................................................................................. 58
RCJ (Cold junction compensation) ............................................................................ 59
Adjusting the PV (Measured value) display (0%)....................................................... 60
Adjusting the PV (Measured value) display (100%)................................................... 60
DI operation ............................................................................................................... 61
Station No. for communication ................................................................................... 64
Parity for communication ........................................................................................... 65
Input type for PYP...................................................................................................... 66
Retransmisson output type setting ............................................................................ 67
Retransmisson base scale......................................................................................... 68
Retransmisson span scale......................................................................................... 68
Parameter display mask ............................................................................................ 69
3 Troubleshooting ...................................................................................................................... 70
Index ......................................................................................................................................... 72