Fuji Xerox ApeosPort-V C5580 Administrator's Guide

Common Service Settings
147
Tools
5
For information about how to enter characters, refer to "Entering Text" (P.33).
Paper Tray Attributes
You can set the size and type of paper loaded in trays.
Note • When envelopes are loaded in HCF B1-S, select [Envelope Feeder] and [Change Settings] on the
[Tray 6] screen, and then set [Paper Size] and [Paper Color]. Set [Paper Type] to [X-HW Plus 2 (257-
300 gsm)].
Important • When you copy or print papers, set [Paper Type] to [X-HW Plus 2 (257-300 gsm)].
For more information, refer to "Changing the Paper Settings" (P.63).
 Change Settings
Select this button, if you change the paper size for the tray or the setting of auto paper
selection.
When you load non-standard size paper in a tray, select [Custom Size], and specify the width
and length. When you load standard size paper in a tray, select [Auto Detect].
Important • Align the paper guides against the paper to prevent paper jams or errors. If the machine cannot
detect a tray, use Tray 5.

Paper Type
Select the type of paper to load in the trays.
For information about paper types available on the machine, refer to "Loadable Quantity and Weight for Supported
Paper" (P.36).

Paper Size
When using Trays 1 and 2, you can load both standard size paper and non-standard size
paper. When using Trays 3 and 4, you can load only standard size paper. When you load
non-standard size paper, select [Custom Size], and then set the size in the X (width)
between 182 and 457 mm and the Y (length) between 140 and 320 mm in 1 mm
increments.
When using Tray 6 (HCF (2000 sheets)), you can load standard size paper only. Select
[Auto Size Detect].
For Tray 6 (HCF B1), you can load both standard size paper and non-standard size paper.
When you load non-standard size paper, select [Custom Size], and then set the size in the
X (width) between 100 and 330 mm and the Y (length) between 148 and 488 mm in 1
mm increments.

Paper Color
Set the color of paper. The paper color selected here is displayed as the paper color on the
[Paper Supply] screen.

Auto Paper Select
Set the condition for Auto Paper selection. When the color mode selected is used, Auto
Paper selection is enabled. Select from [All Colors], [Color], and [Black & White].
Automatic tray selection means that a tray containing the appropriate paper is
automatically selected by the machine for copying or printing.
Customize Paper Supply Screen
Select whether the setting items specified in [Paper Size] or [Auto Paper Select] in [Paper
Tray Attributes] are to be displayed on the [Paper Supply] screen.
 Disabled
Does not display the items specified in [Paper Size].

Fuji Xerox ApeosPort-V C5580 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V C5580
Category	All in One Printer
Language	English