Fuji Xerox ApeosPort-V C5580 Administrator's Guide

9 Scanner Environment Settings
344
Scanner Environment Settings
9
Configuration of Scan to My Folder (ApeosPort Series Models Only)
This section describes how to configure the machine to use the Scan to My Folder service.
Step 1 Preparations.....................................................................................................................................................................344
Step 2 Enabling SMB Port and Setting up TCP/IP ...............................................................................................................344
Step 3 Configuring Remote Authentication..........................................................................................................................345
Step 4 Configuring Scan to My Folder....................................................................................................................................346
Step 5 Configuration on the Computer.................................................................................................................................. 347
Step 1 Preparations
The Scan to My Folder service allows you to forward scanned files to recipients which vary
depending on a login user when [Login to Remote Accounts] is selected for [Login Type].
The following items are required to use the Scan to My Folder feature.
 Remote Authentication System
To use the Scan to My Folder service, a remote authentication system is required.
For more information about a remote authentication system, refer to "Authentication System" (P.207).
 Destination Computer
The following operation system must be installed on a destination computer.
For Mac OS X, a sharing user account is required on the Mac OS X.

Microsoft Windows 2000

Microsoft Windows Server 2003

Microsoft Windows Server 2008

Microsoft Windows Server 2008 R2

Microsoft Windows Server 2012

Microsoft Windows XP

Microsoft Windows Vista

Microsoft Windows 7

Microsoft Windows 8

Mac OS X 10.4.11 Tiger

Mac OS X 10.5 Leopard

Mac OS X 10.6 Snow Leopard
Step 2 Enabling SMB Port and Setting up TCP/IP
To use Scan to My Folder service, enable the SMB port and set the IP address. The following
describes the configuration procedures on the machine.
Note • You can configure the settings using CentreWare Internet Services. For information on how to use
CentreWare Internet Services, refer to "Configuring Machine Settings Using CentreWare Internet
Services" (P.311).
1 Display the [Tools] screen.
1) Press the <Log In/Out> button.

Fuji Xerox ApeosPort-V C5580 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V C5580
Category	All in One Printer
Language	English