Fuji Xerox ApeosPort-V C5580 Administrator's Guide

Common Service Settings
165
Tools
5
Important • If [Print Universal Unique ID] is set to [Yes], you cannot select [Auto Detect] for [Tray 5].
Print Position
Select a print position from six positions: [Top Left], [Bottom Left], [Top Center], [Bottom
Center], [Top Right], or [Bottom Right].
Print Position Adjustment
Adjust print positions vertically and horizontally from 0 to 100 mm and from 0 to 200 mm
respectively, in 0.5 mm increments.
Note • 0 mm is at the edge of paper. Increasing the value moves the print position toward the center of the
paper. However, for [Top Center] or [Bottom Center], the horizontal value for the center of paper is
set to 100 mm. Therefore, when you select [Top Center] or [Bottom Center], set the value to 100 mm
and then specify desired value.
Print Position (Side 2)
Select the position to print the UUID on Side 2 from [Same as Side 1] or [Mirror Side 1] when
making 2 sided copies.
Image Log Control (ApeosPort Series Models Only)
The Image Log Control is a feature that creates image data of documents processed on the
machine and stores the image data with other information such as the user of the job, time,
and sets as logs. This feature can manage jobs and track down the problem such as leakage
of confidential documents.
Important • If you set [Assurance Level] of [Image Log Generation] or [Transfer Image Log] to [High], jobs will be
printed after generating or transferring image logs, and it may take considerable time to print.
• The Image Log Control feature is processed on a priority basis depending on the document image
of a job, the data size, the processing of multiple jobs other than the Image Log Control feature, the
[Assurance Level] setting, or the [Transfer Image Log - Assurance Level] setting.
• The Image Log Control feature is designed to supplement the security feature for documents;
therefore, creating image logs or job processing other than the feature may take long.
• From a security perspective, the machine cannot abort (forcibly terminate) image log creation to
give priority to store data.
• Searching for images and print job logs allows the system administrator to grasp the identification
information of the user who instructed the job. Note that Fuji Xerox is not responsible for a privacy
issue of the user caused by using the Image Log Control feature.
• In the event of forced power failure such as a blackout or a hard disk failure, it is not guaranteed the
image logs are securely created and/or transferred.
• Only the jobs performed after the start of the Image Log Control feature will be covered by the
Image Log Control feature.
• Because the images to be controlled are created based on the input images, the images will not
always be the same as the output images. The following information is added or edited during
output; thus, the images will not be reflected.
• For PDF files created as images, the [PDF Security] feature and the [PDF Signature] feature cannot
be used.
• Images with higher resolution than the input image cannot be created regardless of the setting of
[Resolution] under [Image Log Generation]. If the resolution of the input image is lower than the

Layout change
during output

Secure Watermark

Image composing such as
repeating images (Copy)

Separator

Banner

Booklet Creation (Copy)

Annotation

Cover Page (Fax)

Form Overlay (Print)

Watermark

Fuji Xerox ApeosPort-V C5580 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V C5580
Category	All in One Printer
Language	English