Configuration for Account Administration
413
Authentication and Accounting Features
14
Configuration for Account Administration
This section describes the settings to use the Accounting feature on the machine.
Step 1 Selecting an Accounting Type......................................................................................................................................413
Step 2 Registering User Information ......................................................................................................................................413
Step 1 Selecting an Accounting Type
The following describes the configuration procedures to use the Accounting feature.
Note • For information on relationships between the Authentication and Accounting modes, refer to
"Authentication and Accounting Relationship" (P.396).
1
Press the <Log In/Out> button.
2
Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator’s passcode,
and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
4
Select [Accounting].
5
Select [Accounting Type].
6
Select an accounting type, and then select [Save].
Note • You can select the accounting type from [Local Accounting], [Network Accounting], and [Xerox
Standard Accounting].
For information on the accounting types, refer to "Accounting Type" (P.289).
7
Select [Close] repeatedly until the [Tools] screen is displayed.
8
Select [Close].
Step 2 Registering User Information
1
Press the <Log In/Out> button.
2
Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator’s passcode,
and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
4
Select [Accounting].
5
Select [Create/View User Accounts].
To Next Page
Loading...
Need help?
General
