14 Authentication and Accounting Features
414
Authentication and Accounting Features
14
6
Select [<Available>], and then select [Create/Delete].
7
Enter a User ID and select [Save].
8
Select [Service Access].
9
Configure the [Service Access] and [Feature Access] settings for each service, and then
select [Save].
For more information on the account limit, refer to "Service Access" (P.286).
10
If necessary, select a user role and an authorization group for the user under [User Role],
and then select [Save].
Note • [User Role] is displayed only when [Login Type] is set to [Login to Local Accounts].
For more information on the user role, refer to "User Role" (P.287).
11
Select [Close] repeatedly until the [Tools] screen is displayed.
12
Select [Close].
To Next Page
Loading...
Need help?
General
