To Next Page

To Previous Page

Connectivity & Network Setup

201

Tools

HTTP Proxy Server Password

Enter a password of the HTTP proxy server. Up to 31 characters are allowed.

HTTPS Proxy Server Name

Enter the HTTPS proxy server name or the IP address. Up to 255 characters are allowed. You

can specify the addresses by IPv4 address, IPv6 address, and FQDN.

HTTPS Proxy Server Port Number

Set the HTTPS proxy server port number from 1 to 65535.

The default value is 8080.

Important • Do not use the numbers assigned to the other ports.

HTTPS Proxy Server Authentication

Select [Enabled] when authentication is required to connect to the HTTPS proxy server.

HTTPS Proxy Server Login Name

Enter a login name of the HTTPS proxy server. Up to 31 characters are allowed.

HTTPS Proxy Server Password

Enter a password of the HTTPS proxy server. Up to 31 characters are allowed.

EP Proxy Server Setup

Configure the settings for a proxy server for the EP connection when the EP system via the

Internet is used.

Important • Configure the settings when the EP system via the Internet is used.

For information on EP system, refer to "EP System" (P.711).

Proxy Server Setup

Select the proxy server specification from [Same Proxy for All Protocols] or [Different Proxy

for Each Protocol]. When [Different Proxy for Each Protocol] is selected, you can configure

the HTTPS proxy server and HTTP proxy server respectively. When [Same Proxy for All

Protocols] is selected, the settings for the HTTPS proxy server are copied to those of the

HTTP proxy server.