5 Tools
204
Tools
5
Secondary Server - Login Password
Enter the login password of the secondary server. Up to 31 characters are allowed.
Secondary Server Type
Select the type of secondary server from [Standard] or [Cisco].
SIP Registrar Server Setup
Configure SIP registrar server settings. You can set a primary server and a secondary server.
Note • You can use up to two SIP registrar servers.
• Select [Cisco] for a server type.
Primary Server - IP Address
Enter the IP address of the primary server. Up to 255 characters are allowed. You can specify
the addresses by IPv4 address, IPv6 address, and FQDN.
Primary Server - Port Number
Set the primary server port number from 1 to 65535.
The default value is 5060.
Primary Server - Login User Name
Enter the login user name of the primary server. Up to 31 characters are allowed.
Primary Server - Login Password
Enter the login password of the primary server. Up to 31 characters are allowed.
Primary Server Type
Select the type of primary server from [Standard] or [Cisco].
Secondary Server - IP Address
Enter the IP address of the secondary server. Up to 255 characters are allowed. You can
specify the addresses by IPv4 address, IPv6 address, and FQDN.
Secondary Server - Port Number
Set the secondary server port number from 1 to 65535.
The default value is 5060.
Secondary Server - Login User Name
Enter the login user name of the secondary server. Up to 31 characters are allowed.
Secondary Server - Login Password
Enter the login password of the secondary server. Up to 31 characters are allowed.
Secondary Server Type
Select the type of secondary server from [Standard] or [Cisco].
VoIP Gateway Setup
You can configure the following settings for VoIP Gateway 1 to 50.
You can also configure different VoIP gateways by a recipient’s telephone number.
Note • To use a fixed VoIP gateway, do not register the ID, and specify only the IP address for VoIP
Gateway 1.
• You cannot use a VoIP gateway in an IPv6 network.
To Next Page
Loading...
Need help?
General
