Fuji Xerox ApeosPort-V C5580 Administrator's Guide

Fax Service Settings
239
Tools
5
Edge Erase - Top & Bottom Edges
Specify the amount of edges erased from the document in the top and bottom directions.
Specify a value from 0 to 20 mm in 1 mm increments.
Edge Erase - Left & Right Edges
Specify the amount of edges erased from the document in the left and right directions.
Specify a value from 0 to 20 mm in 1 mm increments.
Reduce 8.5 x 11" Original to A4
When [Reduce/Enlarge] in the [Layout Adjustment] screen is set to [Auto %], you can set
whether or not to reduce 8.5 x 11” size document to A4 , while scanning the document.
Pseudo-Photo Gradation Mode
You can select a gradation expression mode. Selecting this mode enables the machine to
change the processing method for gray part (halftone) to achieve near-photo quality. Select
either [Error Diffusion] or [Dither].
Changing this setting also changes the photo gradation mode for Color Scanning (Black &
White).
Folder Selector by G3 ID
Set whether or not to use the Folder Selector by G3 ID feature.
The Folder Selector by G3 ID feature allows you to classify received documents according to
sender's G3ID and store them to specified folders.
Note • When the machine does not send sender's G3 ID to a recipient, the recipient may not send
recipient's G3 ID. In this case, the received documents cannot be classified according to G3 ID.
• Due to that G3 ID is manually registered by a sender, the telephone number set for G3 ID may be
wrong. You can find G3 ID sent by the sender in a Job History Report.
• You can find the G3 ID of the sender in "Input Source" column of a Job History Report.
Folder Selector by Telephone No. / G3 ID
Set whether or not to use the Folder Selector by Telephone No. / G3 ID feature.
This feature allows you to classify received documents according to sender's telephone
number (Caller ID), G3 ID, or recipient's telephone number (Dial-In) and store them to
specified folders.
Note • This screen is displayed as [Folder Selector by G3 ID] when the IP Fax (SIP) Kit is not installed on the
machine. In this case, classifying only by G3 ID is available.
• When the machine does not send sender's G3 ID to a recipient, the recipient may not send
recipient's G3 ID. In this case, the received documents cannot be classified according to G3 ID.
• Due to that G3 ID is manually registered by a sender, the telephone number set for G3 ID may be
wrong. You can find G3 ID sent by the sender in a Job History Report.
• You can find the G3 ID of the sender in "Input Source" column of a Job History Report.
Folder Selector - Service Priority
When using the Folder Selector by Telephone No. / G3 ID feature, specify the priority for the
methods of classifying received documents: by sender's telephone number (Caller ID), G3
ID, or recipient's number (Dial-in). Select priority from [First Priority], [Second Priority], or
[Third Priority] for each method.
Note • This feature is available only when the IP Fax (SIP) kit is installed on the machine.
Folder Selector Setup
Select whether or not to use the Folder Selector Setup feature.

Fuji Xerox ApeosPort-V C5580 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V C5580
Category	All in One Printer
Language	English