Fuji Xerox ApeosPort-V C5580 Administrator's Guide

7 Printer Environment Settings
322
Printer Environment Settings
7

Spool Destination for Jobs
([Properties] > [General Setup] > [Memory Settings] > [LPD])
Note • The spool destination can be configured when the LPD port is enabled.

Receiving buffer size for Port 9100
([Properties] > [General Setup] > [Memory Settings] > [Port 9100])

Port Settings

IP Mode

Host Name

IPv4
- IP Address Resolution
- Port Settings
-IP Address
- Subnet Mask
- Gateway Address

IPv6
- Enable Manual Address
-IP Address
- Link-Local Address
- Gateway Address

Domain Name

DNS Configuration
-IPv4
-IPv6

DHCP/DDNS

WINS Server

Port Number

TBCP Filter
Note • The TBCP filter can be configured when the Adobe PostScript 3 Kit (optional) is installed.

Connection Time-Out

Maximum Number of Sessions
Note • The Maximum Number of Sessions can be configured when the LPD port is enabled.

TCP-MSS Mode

IPv4 Subnet Mask when TCP-MSS Mode is enabled

IP Filtering
-IPv4 Filtering
-IPv6 Filtering

Fuji Xerox ApeosPort-V C5580 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V C5580
Category	All in One Printer
Language	English