Fuji Xerox ApeosPort-V C5580

15 Problem Solving
480
Problem Solving
15
016-750
[Cause] The machine received a printing job ticket with a PDF, an XPS from an application (such
as ContentsBridge) that allows direct transmissions of files, but the printing job ticket
data had a grammar or print instruction unsupported by the machine.
[Remedy] Check whether you are correctly using the application (such as ContentsBridge) and
whether the print instruction was correct.
If your application usage and print instruction are correct, check with the application
manufacturer that sent the print job for operations of the application.
If the error still is not resolved, have the Configuration Report, the Job History Report,
and the print data with the printing job ticket ready, and contact our Customer Support
Center.
Note • XPS stands for XML Paper Specification.
016-751
[Cause] Probable causes are as follows:
1)During the PDF Bridge processing, a syntax or parameter error occurred, an undefined
command was used, and a PDF file was damaged.
2)When [Process Mode [408])] for the PDF Direct Print feature has been set to [PS([1])],
memory is insufficient.
3)When [Process Mode [408])] for the PDF Direct Print feature has been set to [PS([1])],
a PDF file including OpenType fonts is processed.
[Remedy] For 1), use the print driver to print the document.
For 2), take one of the following measures:

Use the print driver to print the document.

Increase PostScript memory.
For 3), create a PDF file in which OpenType fonts are not included.
For more information on the memory, refer to "Allocate Memory" (P.218).
016-752
[Cause] Unable to process for PDF Bridge because of insufficient memory space.
[Remedy] Change the [Image Quality] setting from [High Resolution] to [High Quality], or from
[High Quality] to [Standard].
016-753
[Cause] The password entered does not match that of the PDF file.
[Remedy] Set the correct password on ContentsBridge.
016-755
[Cause] Attempted to process a print-protected PDF file.
[Remedy] Cancel the print protection using Adobe Acrobat
®
, and try printing again.
016-756
[Cause] Do not have permission to use the service.
[Remedy] Consult your system administrator.
016-757
[Cause] The passcode is incorrect.
[Remedy] Enter the correct passcode.
016-758
[Cause] The division does not have permission to use the service.
[Remedy] Consult your system administrator.
016-759
[Cause] The number of pages reached the maximum number of pages for this service.
[Remedy] Consult your system administrator.
016-760
[Cause] An error occurred during PostScript (optional) processing.
[Remedy] Take one of the following measures:

Set [Image Quality] to [High Speed].

Increase PostScript memory.
For more information on [Image Quality], refer to the help of the print driver. For more information on memory, refer to
"Allocate Memory" (P.218).
Error Code Cause and Remedy