Fujitsu Airstage J-II - Page 660

WHEN MANUAL ADDRESS SETTING NUMBER IS RESET

1) Select the “14” in Menu 2 Settings.
Then press the [ENTER] button.
2) To reset address, select “1: Reset” with the [+]
or [-] buttons. If not resetting, press the [MENU]
button to return to the Menu 2 item selection
screen.
“ ” is displayed:
Address automatically
allocated
Not displayed:
Address manually
allocated
: Not reset
: Reset
Press the [ENTER] button to return to the Menu 2
item selection screen.
- (07-134) -
FUNCTION SETTING FUNCTION SETTING