Fujitsu ESPRIMO D5 Series - Connecting the keyboard; Connecting external devices to the serial interface

Getting started
3
2
1
4
5
6
6
3
3
4
► Place the device on the right side as show n.

The screw holes (6)
and guide o penings (4) for secu ring the feet o n the
left side of the dev
ice point upwards.
► Place the feet (3) on the left side of the device so that the pins (2) enter into the co rrespon ding
guide openings (4) on the device and the screws rest against the screw holes (6).
► Tighten the scr
ews to secu re the feet.
► Stand
the device on the f eet as sho wn.
Fujitsu 17