Operation
Operation
Switch the device on
► If necessary, switch the monitor on (see t he operating manual for the monitor).
DeviceMonitor
► Press the ON/OFF switch on t
he front of the device.
The power indicator glows and the device is s tart ed.
Switching off the device
Switching the device o
ff does not disconnect it from the ma ins voltage. To completely
disconnect the mains
voltage, remove the power plug from the power socket.
► Shut down the operating system in the proper way.
DeviceMonitor
The devices switches to power sa ving mode a utomatically and switches off.
Procedureinane
mergency
If the device cannot be switched off, you can force a shutdown by
using the following emergency procedure .
Warning, this could lead to a loss of da ta!
► Press the O N/O F F switch for at least 4 seconds.
The device will switch off.
When you next restart the device, error messages may be displayed
due to the improper s hutdow n.
24 Fujitsu
To Next Page
Loading...
Need help?
General