Fujitsu ESPRIMO D5 Series - Installing and removing a 2½ inch drive (screw fastened); Removing a drive

System expan sio ns
Removing 2½ inch drives from a 3½ inch adapter
1
1
2
3
► Press the EasyCh a
nge rails on the drives slightly together (1) and pull the drives with
the EasyChange r
ails one after the other out of the adapter (2, 3).
a
► Pull the EasyChange rails off the first drive.
► Repeat the step for the second drive.
► If you no longer need the EasyChange ra ils, secure them again at their location in the adapter.
Fujitsu 51