Getting s tarted
Connecting a monitor
► Follow the instructions contained in the m onitor manual to prepare the monitor
for operation (e.g. connecting cables).
Monitor
► Connect the data cable of the mo nitor into the req uired monitor port of your device.
The monitor connector on the device is only approved for use with monitors that
have a rated current less than or e qual to 1.0 A at 230 V or less than or equal to
2.0 A at 100 V. T he values for the monitor current consumption can be found in the
technical data for the monitor or in the operating manual for the monitor.
► Depending on the configur
ation level of your device, plug the mo nitor power
cable into the grounded
mains outlet.
Connecting the mouse
You can connect a US B mouse or a PS/2 mouse to your device.
Mouse,Connecting,
Connecting a USB m ouse
► Connect the USB mouse to one of the USB ports on the device.
USBport,USBport
Connecting a PS/2 mouse
The PS/2 mouse is only detected by the device if you connect the mouse when
the device is switched off and then switch the device on again.
► Connect th e PS/
2 mouse to the PS/2 mouse port of the device.
PS/2mouse,Connecting,PS/2mouse,
► Switch your device on again.
20 Fujitsu
To Next Page
Loading...
