Operation
Indicators on the device
Indicators,Device
The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
2
3
1
4
No. Indicator Description
1 Drive indicator
(depending on device
variant):
The indicator lights up when the CD-ROM or DVD drive in the
device is accessed. Never under any circumstances remove the
CD/DVD while the indicator is lit.
2 Hard disk indicato r The indicator lights up when the hard disk drive in the device
is being a ccessed .
3 Power-on indicato r
Caution: In e
nergy-saving mode, the device must not be
disconnecte
d from the mains supply, as this could lead to loss
of data.
• The indica
tor is illuminated:
The device is switched on.
• The indic
ator is flashing:
The device is in energy-saving mode. After be ing switched o n
with the O N/O FF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
•Theind
icator is not lit:
The device is switched off.
4
Indicator for optional
components, e.g .
SmartCard reader
(depending on the
device variant)
The indicator lights up when optional components, e.g. SmartCard
reader, are accessed.
Fujitsu 25
To Next Page
Loading...
Need help?
General