Fujitsu ETERNUS CS800 - Page 97

Initial Configuration Creating a Typical Backup Configuration
U41842-J-Z125-1-76 97
Dokuschablonen qua19x24 Version 1.1us für FrameMaker V7.x vom 25.03.2010 © cognitas GmbH 2001-2010
1. April 2010 Stand 11:05.10 Pfad: G:\allgemein\CS800\1000500_FTS-Doku\1000502_GettingStartedGuide\GettingStarted.k08
a) In the Domain Type box, select Workgroup.
b) In the Domain/Workgroup Name box, type the name of the Windows workgroup
to join.
c) Click Apply.
A confirmation message appears. Click Yes to confirm, then click OK to continue.
3. To add a Workgroup User, select the Access Control tab and enter a Username and
Password. Do NOT grant admin rights and click Apply.
4. Create a de-duplicated NAS share:
a) From the NAS & OST page, click the NAS tab.
The NAS Shares page displays.
b) From the NAS Shares page, click the Add tab.
The Add NAS Share page displays (see figure 73).
Figure 73: Add NAS Share Page
a) In the Name box, type a name for the NAS share.
The share will appear as this name on the Windows network.
b) Under Protocol, select Export using CIFS.
c) Ensure that the Enable Deduplication check box is selected (deduplication is
enabled by default).