Fujitsu ETERNUS DX100 S3 - Page 86

(5) Fasten the drive enclosure in the rack.
Use four M5 screws to fasten it in the rack pillar.
M5 screws
M5 screws
(6) Attach the "DE_No." labels to the positions shown below.
Attach the labels in the same installation order as the drive enclosures (cable between enclo-
sures connection order).
DE_No. label
Right front side of the drive enclosure Upper right rear side of the drive enclosure
The DE_No. labels are supplied with the ETERNUS DX.
Chapter 5
Component Expansion/Function Enhancement
5.2 Installing Additional Drive Enclosures
86
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0