Chapter 1 System Management
1.8 Network Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
103
9 Click the [Done] button to return to the [Network] screen.
■ When using IPv6
The procedure to set network environment using IPv6 address is as follows:
1 Select which port to set the network environment for, and click [Setup Network
Environment] in [Action].
2 Specify the parameters.
If the gateway is specified, the information of the remote storage systems for which network access will
be allowed can be input.
The main setting items are as follows.
● LAN
• Speed and Duplex
• Wake on LAN
Device management operation cannot be continued if the IP address of the ETERNUS DX has been
changed. Logging in again with the new IP address is required.
To Next Page
Loading...
