Fujitsu ETERNUS DX100 S3 - Page 1050

Appendix D Supported Functions for Each Controller Firmware Version
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1050
Modify Cache Parameters
(Thin Provisioning Pool)
✓✓✓✓✓✓✓✓✓
Assign Eco-mode
Schedule (Thin
Provisioning Pool)
✓✓✓✓✓✓✓✓✓
Start Balancing Flexible
Tier Pool
✓✓✓✓✓✓✓✓✓
Stop Balancing Flexible
Tier Pool
✓✓✓✓✓✓✓✓✓
Advanced Copy
Advanced Copy (Basic
Information)
✓✓✓✓✓✓✓✓✓
Advanced Copy (All Local
Sessions)
✓✓✓✓✓✓✓✓✓
EC ✓✓✓✓✓✓✓✓✓
OPC ✓✓✓✓✓✓✓✓✓
QuickOPC ✓✓✓✓✓✓✓✓✓
SnapOPC ✓✓✓✓✓✓✓✓✓
SnapOPC+ ✓✓✓✓✓✓✓✓✓
Monitor ✓✓✓✓✓✓✓✓✓
Advanced Copy (All
Remote Sessions)
✓✓✓✓✓✓✓✓✓
REC ✓✓✓✓✓✓✓✓✓
ODX Sessions ✓✓✓✓✓✓✓✓✓
XCOPY Sessions ✓✓✓✓✓✓✓✓✓
Virtual Volume Sessions––––––✓✓✓
Setting (Advanced Copy) ✓✓✓✓✓✓✓✓✓
Snap Data Pool ✓✓✓✓✓✓✓✓✓
Copy Path ✓✓✓✓✓✓✓✓✓
REC Buffer ✓✓✓✓✓✓✓✓✓
REC Disk Buffer ✓✓✓✓✓✓✓✓✓
Start SnapOPC+ ✓✓✓✓✓✓✓✓✓
Stop Copy Session ✓✓✓✓✓✓✓✓✓
Register Advanced Copy
License
✓✓✓✓✓✓✓✓✓
Delete Advanced Copy
License
✓✓✓✓✓✓✓✓✓
Modify EC/OPC Priority ✓✓✓✓✓✓✓✓✓
Modify Copy Table Size ✓✓✓✓✓✓✓✓✓
Modify Copy Parameters ✓✓✓✓✓✓✓✓✓
Function
Controller firmware version
V10L10 V10L14 V10L16 V10L20 V10L21 V10L30 V10L32 V10L33 V10L40