Fujitsu ETERNUS DX100 S3 - Page 1075

Appendix H Storage Migration Setting Files
H.1 Template File for Storage Migration Settings
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1075
GROUP PATH Specify the path information of the destination
and source storage systems.
Up to 8 paths per path group can be specified.
[Example]
• For the ETERNUS DX8700 S3/DX8900 S3
PATH=CEx,CMy,CAz,Pw,vvvvvvvvvvvvvvvv
• For the other models
PATH=CMy,CAz,Pw,vvvvvvvvvvvvvvvv
x: CE number, y: CM number, z: CA number,
w: Port number
vvvvvvvvvvvvvvvv: WWN
4–
CE Specify the location information (CEx,
CMy, CAz, Pw) of the destination FC-
Initiator port to which the path is
configured.
• For the ETERNUS
DX8700 S3/DX8900 S3
CEx, CMy, CAz, Pw
• For the other models
CMy, CAz, Pw
x: CE number
y: CM number
z: CA number
w: Port number
CM
CA
P
WWN Specify the World Wide Name (WWN) of
the source FC-Initiator port to which the
path is configured.
16-digit hexadecimal
GROUP VOL Specify the source LUN (Y) and the destination
volume (Z).
The maximum number of source LUNs for each
migration path (PATH) is 512.
[Example] VOL=Y, Z
Example of specifying source LUNs and
destination volumes
Source LUN:
0 - 255
(decimal)
0xYYYY
(4-digit hexadecimal)
0xYYYYYYYYYYYYYYYY
(16-digit hexadecimal)
Destination volume:
Z (decimal)
0xZZZZ
(4-digit hexadecimal)
Keyword Number of
settings
Allowed input
Source LUN Destination volume
Input a decimal number
Specification method: "0x"
is not added on top of the
value.
Decimal numbers can be
used only when the source
LUN is from "0" to "255".
Input a decimal number
Specification method:
"0x" is not added on top of
the value.
Input a hexadecimal number
(4-digit)
Specification method:
Add "0x" on top of the value.
Input in "0xYYYY" format.
Input a hexadecimal number
(4-digit)
Specification method:
Add "0x" on top of the value.
Input in "0xZZZZ" format.
Input a hexadecimal number
(16-digit)
Specification method:
Add "0x" on top of the value.
Input in
"0xYYYYYYYYYYYYYYYY"
format.