Fujitsu ETERNUS DX100 S3 - Page 110

Chapter 1 System Management
1.8 Network Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
110
For details on the parameters for this function, refer to "A.1.7.2 Setup Firewall" (page 708).
For the factory default settings for this function, refer to "Appendix B Setup Firewall" (page 980)
.
The procedure to set a firewall is as follows:
Procedure
1 Select which port to set the firewall for (multiple selections can be made) and click [Setup
Firewall] in [Action].
2 Specify whether to enable or disable the connection of each service.
The main setting items are as follows.
● Firewall Settings
• HTTP
• HTTPS
• Telnet
• SSH
• ICMP
• Maintenance-Secure
• SNMP
• RCIL
• ETERNUS DX Discovery
3 Click the [Set] button.
 A confirmation screen appears.
4 Click the [OK] button.
 Setting of the firewall starts.