Chapter 1 System Management
1.8 Network Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
128
The procedure to perform the SNMP Trap test is as follows:
1 Click [Send SNMP Trap] in [Action].
Click the [Send] button.
A confirmation screen appears.
2 Click the [OK] button.
The SNMP Trap test is performed.
3 Click the [Done] button to return to the [Network] screen.
Confirm that the trap has been successfully received by SNMP Manager after the SNMP Trap test has
been performed.
To Next Page
Loading...
