Fujitsu ETERNUS DX100 S3 - Page 131

Chapter 1 System Management
1.8 Network Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
131
The main setting items are as follows.
● Notification E-Mail Settings
• Notification E-Mail
• Destination E-Mail Address
• Comment
● Mail Server Settings
• LAN Port used for SMTP Connection
• SMTP Server
• SNMP Port No.
• Sender E-Mail Address
• SMTP over SSL
• SMTP requires authentication
• Authentication Method
• User Name
• Password
3 Click the [Set] button.
 A confirmation screen appears.
4 Click the [OK] button.
 The specified E-mail notification setting is performed.
5 Click the [Done] button to return to the [Network] screen.
End of procedure
Perform the following operations to confirm that an E-Mail can be sent to the specified address.
1. Select "Yes" for "Notification E-Mail", and click the [Set] button to save the changes. (Even if "Yes" is already selected for
"Notification E-Mail", the settings must be saved when settings such as the destination E-Mail address are changed.)
2. Restart this function and then click the [Send Test E-Mail] button.