Fujitsu ETERNUS DX100 S3 - Page 259

Chapter 3 Volume Management
3.1 Create Volume
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
259
Setting items for each volume type when selecting "Manual"
• Setting items for normal use
✓: Required settings
Blank: Settings that are not required
-: N/A
*1: The following items are advanced settings. It is not necessary to change the default setting for normal use.
• "Wide Stripe Size" and "Concatenation Order" under the "Manual Setting (Volume Information)" field.
• "Stripe Depth" under the "Manual Setting (Select RAID Group Information)" field.
*2: The NAS FS block size cannot be specified for TPV.
*3: The number of volumes cannot be specified for NAS.
Setting items Standard TPV
NAS
SDV SDPV WSV (*1) Remarks
New Volume Name ✓✓✓✓✓
Capacity ✓✓ ✓✓
Type ✓✓✓✓✓
Capacity of
source
volume
only SDV
✓
Allocation ✓
NAS FS Block
Size
✓ (*2)
RAID Group/
TPP Selection
Manual
Data Integrity ✓
Manual
Setting or
Manual
Setting
(Volume
Information)
Use all
Largest Free
Space
Volume No.
Encryption by
CM
✓ – ✓✓✓
"Off" (fixed) when
the encryption
mode is disabled
or when the drive
type is "Online
SED", "Nearline
SED", or "SSD SED"
Number of
Volumes
(RAID group)
✓ – ✓✓ –
Number of
Volumes
(TPP)
– ✓ (*3) – – –
Number of
Volumes
(WSV)
––––✓
Manual
Setting
(Select RAID
Group
Information)
Drive Type––––✓
RAID Level – – – – ✓
Number of
Member
Drives
––––✓