Chapter 4 Connectivity Management
4.1 Host Affinity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
347
5 Select a CA port to configure a host affinity, and click the [OK] button.
The display returns to the initial screen.
6 Click the [Browse...] button for the LUN group.
The [Select LUN Group] screen appears.
• If a specific host has been selected in the "Host" field, CA ports for which the affinity mode is "OFF"
are not displayed.
• If "All" has been selected in the "Host" field, CA ports with any of the following conditions are not
displayed:
- The affinity mode is "ON"
- The CA ports are used in the CA port group
- The CA port is used by another host affinity
• CA ports that are used for the Storage Cluster function are not displayed.
To Next Page
Loading...
