Fujitsu ETERNUS DX100 S3 - Page 393

Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
393
For details on the parameters for this function, refer to "A.4.2.5 Modify Host Group (iSCSI)" (page 824).
The procedure to modify an iSCSI host group is as follows:
Procedure
1 Select the iSCSI host group to be changed, and click [Modify Host Group] in [Action].
2 Input a new host group name, or re-select a host response to be assigned to the host group.
The main setting items are as follows.
● Host Group Setting
• Host Group Name
• Host Response
• When a host was added to a host group, of which the host affinity setting has been configured, paths
between all the ports with the host affinity setting and the added host will be configured. To modify the
path between a host and a port, refer to "4.1.3 Modify Host Affinity" (page 351)
.
• When a host in the host group for which the host affinity settings are already configured is deleted, the
path from the host to the port is also deleted.
• To change the iSCSI host information, use the procedure in "4.2.16 Modify iSCSI Host" (page 425)
.
• To create a new host group and register hosts, use the procedure in "4.2.2 Add iSCSI Host Group" (page
372).