Chapter 4 Connectivity Management
4.3 CA Port Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
461
The procedure to change the port mode is as follows:
1 Click [Modify Port Mode] in [Action].
2 Select the port mode to be changed over to.
The main setting item is as follows.
● Port List
• Port Mode (After)
3 Click the [Set] button.
A confirmation screen appears.
4 Click the [OK] button.
Port mode changeover starts.
5 Click the [Done] button to return to the [CA Port] screen.
If the specified FC-Initiator port is configured in Storage Migration path, an error screen appears. If
this occurs, check the parameter settings.
"RA" and "CA/RA" are displayed as options only for the models that support REC.
To Next Page
Loading...
