Chapter 4 Connectivity Management
4.7 Host-LU QoS Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
494
The procedure to set the FC port QoS is as follows:
1 Select the FC port to set the bandwidth limit (multiple selections can be made), and click
[Set FC Port QoS] in [Action].
2 Select the FC port bandwidth limit.
The main setting item is as follows.
● FC Port QoS Setting
• Bandwidth Limit
3 Click the [Set] button.
A confirmation screen appears.
4 Click the [OK] button.
The FC port QoS setting starts.
5 Click the [Done] button to return to the [FC Port QoS] screen.
To Next Page
Loading...
