Chapter 4 Connectivity Management
4.8 NAS Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
524
The procedure to change the quota settings is as follows:
1 Select the quota setting information that is to be changed and click [Modify Quota Setting]
in [Action].
2 Edit the quota setting information.
The main setting items are as follows.
● Quota Settings
• Drive Space
• File Count
• In the following conditions, a warning message indicates that writing to the drive is prohibited
appears. Check the parameter settings.
- The modified limit value of the drive space is less than the currently used drive space
- The modified limit value of the file count is less than the currently used file count
• If an error screen appears under the following conditions, check the parameter settings.
- The "Warning" or "Limit" does not satisfy the input conditions
- The four threshold values for the drive space and the file count are all "0" or not specified
To Next Page
Loading...
