Chapter 5 RAID Group Management
5.1 Create RAID Group
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
533
3 Specify the RAID group detailed information.
The main setting items are as follows.
● New RAID Group
• Name
● Manual Setting
• RAID Level
• Fast Recovery Configuration
• RAID Group Capacity
If an error screen appears under the following conditions, check the parameter settings.
• The name overlaps with an existing volume name for "Name"
• The "Name" does not satisfy the input conditions
• The specified Stripe Depth is not allowed for the RAID level
To Next Page
Loading...
