Fujitsu ETERNUS DX100 S3 - Page 561

Chapter 6 Thin Provisioning Pool Management
6.2 Create Thin Provisioning Pool
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
561
■ Automatically selecting drives to create TPPs
To create a new TPP automatically, select Drive Type and RAID Level, and input TPP capacity. The Controlling
CM of the RAID groups that configure the TPP is determined automatically.
The procedure to create a TPP by selecting drives automatically is as follows:
Procedure
1 Click [Create] in [Action].
2 Select "Automatic" for the create mode and specify the other parameters.
The main setting items are as follows.
● New Thin Provisioning Pool
• Name
● Automatic Setting
• Drive Type
• RAID Level
• Select Drives (not displayed for the ETERNUS DX60 S3)
• Thin Provisioning Pool Total Capacity
• Alarm