Chapter 6 Thin Provisioning Pool Management
6.11 Start Balancing Flexible Tier Pool
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
588
The procedure to start balancing FTRP is as follows:
1 Select the FTRP for which balancing is to be started and click [Start Balancing FTRP] in
[Action].
A confirmation screen appears.
2 Click the [OK] button.
FTRP balancing starts.
3 Click the [Done] button to return to the [Flexible Tier Pool] screen.
• When FTRP balancing is performed, the used FTRP capacity may temporarily exceed the threshold. If the
used capacity exceeds the threshold, " Attention" or " Warning" is displayed in the "Used Status"
field for the FTRP. The usage of the FTRPs is displayed in the [Flexible Tier Pool] screen. Refer to "Thin
Provisioning Pool (Basic Information)" in "ETERNUS Web GUI User’s Guide (Operation)" for details.
• FTRP balancing can be performed during the work I/O.
• The balancing levels of FTRPs and FTSPs, and the progress of the FTRP balancing sessions can be checked.
Refer to "Thin Provisioning Pool (Basic Information)" in "ETERNUS Web GUI User’s Guide (Operation)",
"Flexible Tier Pool Detail (Basic)" in "ETERNUS Web GUI User’s Guide (Operation)", and "Flexible Tier Pool
Detail (Flexible Tier Sub Pool)" in "ETERNUS Web GUI User’s Guide (Operation)" for details.
• The progress of a balancing FTV can be checked in the [Volume Detail] screen. Refer to "Volume (Basic
Information)" in "ETERNUS Web GUI User’s Guide (Operation)" for details.
To Next Page
Loading...
