Fujitsu ETERNUS DX100 S3 - Page 605

Chapter 7 Advanced Copy Management
7.6 Modify Copy Table Size
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
605
The main setting items are as follows.
● Calculation Parameters
• Total Copy Capacity (Restore OPC is not used)
• Total Copy Capacity (Restore OPC is used)
• Sessions (Restore OPC is not used)
• Sessions (Restore OPC is used)
4 Click the [Calculation] button.
 "Resolution" and "Table Size" are automatically calculated.
5 Click the [OK] button.
 The calculated values are reflected to "Resolution" and "Table Size" in the "Advanced Copy Table Size
Setting" field.
6 Click the [Set] button.
 A confirmation screen appears.